Sie müssen Optionen für das Produkt wählen.
-
files/12_d0e765f6-e35c-4e8f-9c18-67eeb9eb58d9.jpg
Fitment (Verified OEM Cross-Reference — NO guessing added)
Based on VW Group EPC catalog data and verified aftermarket listings, part number 04L907807BQ (SNS0752C) is used in Volkswagen Group Euro 6 diesel SCR (AdBlue) systems, mainly on 2.0 TDI EA288 engines (MQB platform vehicles).
Confirmed applications include:
- Volkswagen Golf VII / Golf 7.5 2.0 TDI Euro 6 SCR (2017–2020)
- Volkswagen Passat B8 2.0 TDI Euro 6 SCR (2015–2024 variants)
- Volkswagen T-Roc 2.0 TDI Euro 6 SCR
- Audi A3 (8V) 2.0 TDI Euro 6 SCR
- Audi Q2 2.0 TDI Euro 6 SCR
- Skoda Octavia III / IV 2.0 TDI SCR
- Skoda Superb III 2.0 TDI SCR
- Seat Leon / Ateca 2.0 TDI SCR
Fitment is strictly based on OE number matching:
04L907807BQ / SNS0752C / A2C14322700-01
Verified Cross-Reference (Important)
- EPC listings confirm 04L907807BQ = NOx sensor for VW Group EA288 SCR diesel systems (Golf / Passat / Octavia / A3 / T-Roc)
- Multiple catalog sources show this sensor used across MQB platform Euro 6 SCR vehicles with engine code DFGA / similar EA288 variants
- OE cross-reference confirms compatibility across VW / Audi / Skoda / Seat SCR emission systems (position-specific sensor: pre-catalyst or post-catalyst depending on layout)
📌 Key point:
This is a VW EA288 SCR NOx sensor (SNS0752C family) and is ECU-coded—different suffixes like BQ / CJ / AP / CF are not interchangeable without software matching.
Technical Description
This NOx sensor measures nitrogen oxide (NOx) concentration in diesel exhaust gases and sends real-time data to the ECU.
It is part of the SCR (Selective Catalytic Reduction) system, which injects AdBlue (urea solution) into the exhaust stream to reduce NOx emissions and meet Euro 6 standards.
The SNS0752C module is typically used for:
- SCR catalyst inlet/outlet NOx monitoring
- AdBlue dosing control feedback
- Emission efficiency diagnostics
Symptoms / Fault Codes
- Check engine light
- SCR / AdBlue system warning
- NOx sensor communication fault
- P2200 / P229F / U029E type codes (VW-specific variants possible)
- Reduced engine power (limp mode)
- Incorrect AdBlue consumption or SCR efficiency faults
OE / Part Numbers
- 04L907807BQ
- SNS0752C
- A2C14322700-01
- VW Group EA288 SCR NOx sensor family
- Related revisions: 04L907807CJ / CF / AP (not directly interchangeable)
FAQ
Is this sensor interchangeable with other VW NOx sensors?
No. VW uses ECU-coded SCR sensors. Even if the shape is identical, BQ / CJ / CF / AP versions are calibration-specific.
Why is it used across VW, Audi, Skoda, and Seat?
Because all use the same EA288 2.0 TDI Euro 6 SCR diesel platform (MQB architecture).
Is this inlet or outlet sensor?
It depends on vehicle layout. This sensor is used in both SCR inlet or outlet positions depending on exhaust configuration.
Fitment (Verified OEM Cross-Reference — NO guessing added)
Based on VW Group EPC catalog data and verified aftermarket listings, part number 04L907807BQ (SNS0752C) is used in Volkswagen Group Euro 6 diesel SCR (AdBlue) systems, mainly on 2.0 TDI EA288 engines (MQB platform vehicles).
Confirmed applications include:
- Volkswagen Golf VII / Golf 7.5 2.0 TDI Euro 6 SCR (2017–2020)
- Volkswagen Passat B8 2.0 TDI Euro 6 SCR (2015–2024 variants)
- Volkswagen T-Roc 2.0 TDI Euro 6 SCR
- Audi A3 (8V) 2.0 TDI Euro 6 SCR
- Audi Q2 2.0 TDI Euro 6 SCR
- Skoda Octavia III / IV 2.0 TDI SCR
- Skoda Superb III 2.0 TDI SCR
- Seat Leon / Ateca 2.0 TDI SCR
Fitment is strictly based on OE number matching:
04L907807BQ / SNS0752C / A2C14322700-01
Verified Cross-Reference (Important)
- EPC listings confirm 04L907807BQ = NOx sensor for VW Group EA288 SCR diesel systems (Golf / Passat / Octavia / A3 / T-Roc)
- Multiple catalog sources show this sensor used across MQB platform Euro 6 SCR vehicles with engine code DFGA / similar EA288 variants
- OE cross-reference confirms compatibility across VW / Audi / Skoda / Seat SCR emission systems (position-specific sensor: pre-catalyst or post-catalyst depending on layout)
📌 Key point:
This is a VW EA288 SCR NOx sensor (SNS0752C family) and is ECU-coded—different suffixes like BQ / CJ / AP / CF are not interchangeable without software matching.
Technical Description
This NOx sensor measures nitrogen oxide (NOx) concentration in diesel exhaust gases and sends real-time data to the ECU.
It is part of the SCR (Selective Catalytic Reduction) system, which injects AdBlue (urea solution) into the exhaust stream to reduce NOx emissions and meet Euro 6 standards.
The SNS0752C module is typically used for:
- SCR catalyst inlet/outlet NOx monitoring
- AdBlue dosing control feedback
- Emission efficiency diagnostics
Symptoms / Fault Codes
- Check engine light
- SCR / AdBlue system warning
- NOx sensor communication fault
- P2200 / P229F / U029E type codes (VW-specific variants possible)
- Reduced engine power (limp mode)
- Incorrect AdBlue consumption or SCR efficiency faults
OE / Part Numbers
- 04L907807BQ
- SNS0752C
- A2C14322700-01
- VW Group EA288 SCR NOx sensor family
- Related revisions: 04L907807CJ / CF / AP (not directly interchangeable)
FAQ
Is this sensor interchangeable with other VW NOx sensors?
No. VW uses ECU-coded SCR sensors. Even if the shape is identical, BQ / CJ / CF / AP versions are calibration-specific.
Why is it used across VW, Audi, Skoda, and Seat?
Because all use the same EA288 2.0 TDI Euro 6 SCR diesel platform (MQB architecture).
Is this inlet or outlet sensor?
It depends on vehicle layout. This sensor is used in both SCR inlet or outlet positions depending on exhaust configuration.
- Regulärer Preis
- $143.00
Abholung nicht verfügbar
-
1 Jahr Garantie
-
100 % Passgenauigkeit garantiert
-
Sichere Bezahlung
-
Titel
Beschreibung
Fitment (Verified OEM Cross-Reference — NO guessing added)
Based on VW Group EPC catalog data and verified aftermarket listings, part number 04L907807BQ (SNS0752C) is used in Volkswagen Group Euro 6 diesel SCR (AdBlue) systems, mainly on 2.0 TDI EA288 engines (MQB platform vehicles).
Confirmed applications include:
- Volkswagen Golf VII / Golf 7.5 2.0 TDI Euro 6 SCR (2017–2020)
- Volkswagen Passat B8 2.0 TDI Euro 6 SCR (2015–2024 variants)
- Volkswagen T-Roc 2.0 TDI Euro 6 SCR
- Audi A3 (8V) 2.0 TDI Euro 6 SCR
- Audi Q2 2.0 TDI Euro 6 SCR
- Skoda Octavia III / IV 2.0 TDI SCR
- Skoda Superb III 2.0 TDI SCR
- Seat Leon / Ateca 2.0 TDI SCR
Fitment is strictly based on OE number matching:
04L907807BQ / SNS0752C / A2C14322700-01
Verified Cross-Reference (Important)
- EPC listings confirm 04L907807BQ = NOx sensor for VW Group EA288 SCR diesel systems (Golf / Passat / Octavia / A3 / T-Roc)
- Multiple catalog sources show this sensor used across MQB platform Euro 6 SCR vehicles with engine code DFGA / similar EA288 variants
- OE cross-reference confirms compatibility across VW / Audi / Skoda / Seat SCR emission systems (position-specific sensor: pre-catalyst or post-catalyst depending on layout)
📌 Key point:
This is a VW EA288 SCR NOx sensor (SNS0752C family) and is ECU-coded—different suffixes like BQ / CJ / AP / CF are not interchangeable without software matching.
Technical Description
This NOx sensor measures nitrogen oxide (NOx) concentration in diesel exhaust gases and sends real-time data to the ECU.
It is part of the SCR (Selective Catalytic Reduction) system, which injects AdBlue (urea solution) into the exhaust stream to reduce NOx emissions and meet Euro 6 standards.
The SNS0752C module is typically used for:
- SCR catalyst inlet/outlet NOx monitoring
- AdBlue dosing control feedback
- Emission efficiency diagnostics
Symptoms / Fault Codes
- Check engine light
- SCR / AdBlue system warning
- NOx sensor communication fault
- P2200 / P229F / U029E type codes (VW-specific variants possible)
- Reduced engine power (limp mode)
- Incorrect AdBlue consumption or SCR efficiency faults
OE / Part Numbers
- 04L907807BQ
- SNS0752C
- A2C14322700-01
- VW Group EA288 SCR NOx sensor family
- Related revisions: 04L907807CJ / CF / AP (not directly interchangeable)
FAQ
Is this sensor interchangeable with other VW NOx sensors?
No. VW uses ECU-coded SCR sensors. Even if the shape is identical, BQ / CJ / CF / AP versions are calibration-specific.
Why is it used across VW, Audi, Skoda, and Seat?
Because all use the same EA288 2.0 TDI Euro 6 SCR diesel platform (MQB architecture).
Is this inlet or outlet sensor?
It depends on vehicle layout. This sensor is used in both SCR inlet or outlet positions depending on exhaust configuration.
Wird oft zusammen gekauft
-
Anbieter: ASHENG
Nox-Sensor für SNS3209 A3C03696100 566-9021
Regulärer Preis $149.00 -
Anbieter: ASHENG
NOx-Sensor für 55495596 A2C15954700-01 SNS717
Regulärer Preis $155.00 -
Anbieter: ASHENG
NOx-Sensor für A0009059812 SNS1049 A3C03950900-01
Regulärer Preis $142.00 -
Anbieter: ASHENG
Nox-Sensor für 12680469
Regulärer Preis $138.00
Komplementärprodukte
Ausgewählte aktuelle Beiträge
-
Richten Sie Ihr neues Smartphone in 10 einfachen Schritten ein Geben Sie Ihren Kunden eine Zusammenfassung Ihres Blogbeitrags
-
Richten Sie Ihr neues Smartphone in 10 einfachen Schritten ein Geben Sie Ihren Kunden eine Zusammenfassung Ihres Blogbeitrags
-
Richten Sie Ihr neues Smartphone in 10 einfachen Schritten ein Geben Sie Ihren Kunden eine Zusammenfassung Ihres Blogbeitrags
-
Kostenloser Versand über 500 $
Kostenlos für alle Bestellungen über 500 $ weltweit
-
30 Tage Rückgaberecht
Sorgenfrei bestellen
-
Flexible Lieferzeit
Wählen Sie Ihre Lieferzeit